Advantech IPC-623 Series Instrukcja Użytkownika Pobierz pdf (Strona 23)

IPC-623 User's Manual

Figure 2-6: Do not do this!

Replacing the redundant power supply module:

1. Make sure that the power supply module is the same rating as the one currently installed.

2. Open the front chassis door as wide as you can. See figures 2-4 and 2-5.

3. Slide the power supply module inward until it locks into place.

4. Flip back the power supply module handle toward the chassis.

2.5.2 The single power supply model

With this configuration, there is only one single 400 W AT power supply. It is hidden inside the front

section of the chassis, at the left. With only one power supply module installed, an additional drive bay

can be installed next to that power supply. Six 3.5" hard drives can be installed in this internal drive

bay. Please see figures 2-6-a and 2-6-b.

At the right is the standard drive bay. Refer to section 2.4 for a more detailed description. Installed at

the rear section is the backplane.

WARNING: Do not remove the power supply module if the front chassis door is not opened

completely. Removing the power supply module in such a way might result in

damage of your chassis. See figure 2-6.

Figure 2-6-a Figure 2-6-b

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29

Brak uwag

Advantech IPC-623 Series Instrukcja Użytkownika Strona 23