Advantech PCA-6190 Instrukcja Użytkownika Pobierz pdf (Strona 15)

7 ACP-4320 User Manual

Chapter 2 System Setup

3. While installing a BACKPLANE, put it in place and then attach the supplied EMI

spring shielding onto it. Then fasten the screws provided. (see Figure 2.2),

4. For the PICMG 1.0 BACKPLANE, connect the orange-white wire from connec-

tor "HCN1" on the backplane to connector "CN21" on the CPU card.

5. While installing a MOTHERBOARD, attach the motherboard I/O shield onto the

rear plate first. Then fasten the motherboard onto the chassis. (see Figure 2.3)

6. Plug in the 20- pin (or 24-pin) ATX power connector and +12 V power connector

from the power supply to the backplane or motherboard.

7. Connect the wires for the POWER switch, RESET switch, and the front USB

from the front panel to the motherboard.

8. Connect the wires for the POWER LED, HDD LED and LAN LED from the moth-

erboard to the small LED board, which is attached to the front panel of the chas-

sis.

Table 2.1: Yellow label indicating copper stub locations

Note! AIMB-74X series motherboards don't support front LAN LED function.

AIMB-744

Be careful to screw the Copper Stub under 10 kgf cm.

AIMB-750

AIMB-760

AIMB-554

AIMB-762

AIMB-560

PCA-6114P12

PCA-6115

PCE-5B12-64

AIMB-742

AIMB-740

AIMB-741

PCA-6114P12X

PCE-7B13-64

PCA-6113P7X

PCA-6114P10

PCA-6114P4

PCA-6114-B

PCA-6113DP4

PCA-6113P4R

PCA-6114P7

BP/MP MODEL

NUT NUMBER

221154

3910867 16151312 14 20 2117 18 19 27262423 25 MAX28 29

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 41 42

Komentarze do niniejszej Instrukcji

Brak uwag

Advantech PCA-6190 Instrukcja Użytkownika Strona 15

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Obudowy komputerowe Advantech PCA-6190