Advantech 5000 Series Instrukcja Użytkownika Pobierz pdf (Strona 168)

Chapter 6

$aaSiCj3hh

Name Trim Calibration

Description Trims the specified channel a specified number of units

up or down

Syntax $aaSiCj3hh(cr)

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of the ADAM-5000 system.

SiCj identifies the I/O slot i (i : 0 to 3) and the channel

j (j : 0 to 3) of the module you want to calibrate.

3 is the trim calibration command.

hh is the 2-character twos complement hexadecimal

value that represents the number of counts by which to

increase or decrease the output current. Each count

equals approximately 1.5µA. V

alues range from 00 to 5F

and from A1 to FF (hexadecimal), where 00 represents 0

counts, 5F represents +95 counts, A1 represents -95

counts and FF represents -1 counts. Negative values

decrease and positive numbers increase the output

current according to the number of counts.

(cr) is the terminating character, carriage return (0Dh)

Response !aa(cr) if the command is valid.

There is no response if the module detects a syntax error

or communication error or if the specified address does

not exist.

! delimiter character indicating a valid command was

received.

aa (range 00-FF) represents the 2-character hexadecimal

address of an ADAM-5000 system.

ADAM-5000 6-103

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 300 301

Brak uwag

Advantech 5000 Series Instrukcja Użytkownika Strona 168