Advantech AIMB-258 Instrukcja Użytkownika Pobierz pdf (Strona 64)

AIMB-258 User Manual 56

A.1 Programming the Watchdog Timer

The AIMB-258's watchdog timer can be used to monitor system software operation

and take corrective action if the software fails to function after the programmed

period. This section describes the operation of the watchdog timer and how to pro-

gram it.

A.1.1 Watchdog timer overview

The watchdog timer is built into the super I/O controller W83627UHG. It provides the

following functions for user programming:

! Can be enabled and disabled by user's program.

! Timer can be set from 1 to 255 seconds or 1 to 255 minutes.

! Generates an interrupt or resets signal if the software fails to reset the timer

after time-out.

A.1.2 Programming the Watchdog Timer

The I/O port address of the watchdog timer is 2E(hex) and 2F(hex).

2E (hex) is the address port. 2F(hex) is the data port.

You must first assign the address of register by writing address value into address

port 2E(hex), then write/read data to/from the assigned register through data port 2F

(hex).

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

Brak uwag

Advantech AIMB-258 Instrukcja Użytkownika Strona 64