Advantech RSB-4210 Evaluation Kit Instrukcja Użytkownika Pobierz pdf (Strona 54)

RSB-4210 User Manual 46

7. Type #./mkmmc-linux.sh /dev/sdf u-boot.bin uImage ../rootfs

8. Type #y (Start to copy files, waiting few minutes until it shows [Done])

9. Finish.

Then insert the Linux system SD storage card to CN41 of RSB-4210 and it will boot

into the Linux environment when powering up the device.

3.6.2 Booting from Onboard Flash

Another way to boot up RSB-4210 is through the onboard flash. The script "mkmmc-

linux.sh" will help you to build a "uImage" .

1. Refer to Chapter 3.4.1 to make a Linux system SD storage card

2. Demount SD card from File Browser and remove it.

3. Insert this Linux system SD card to RSB-4210 and boot into Linux.

4. On RSB-4210 platform, type #root (login)

5. On RSB-4210 platform, type #cd /mk_inand

6. On RSB-4210 platform, type #sh mkmmc-linux.sh /dev/mmcblk0 u-boot.bin uIm-

age rootfs.tar.gz

7. On RSB-4210 platform, type #y (Start to copy files, waiting a few minutes until it

shows [Done])

8. Power off and remove this SD card.

9. Finish.

Now you can boot from the onboard flash without an SD card.

3.6.3 Booting from SATA DOM

When you get the package for making a Linux system SD storage card, you can refer

to the following steps to boot from SATA DOM. The script "mkmmc-linux.sh" will

help you build a "uImage".

1. Refer to Chapter 3.4.1 to make a Linux system SD storage card

2. Demount SD card from File Browser and remove it.

3. Insert this Linux system SD card to RSB-4210 and boot into Linux.

4. On RSB-4210 platform, type #root (login)

5. On RSB-4210 platform, type #cd /mk_inand

6. On RSB-4210 platform, type #sh mkmmc-linux.sh /dev/sda u-boot.bin uImage

rootfs.tar.gz

7. On RSB-4210 platform, type #y (Start to copy files, waiting a few minutes until it

shows [Done])

8. Power off and remove this SD card.

9. Finish.

Now you can boot from onboard flash without SD card.

3.7 Debug Message

RSB-4210 can communicate with a host server (Windows or Linux) by using serial

cables. Common serial communication programs such as HyperTerminal, Tera Term

or PuTTY can be used in this case. The example below describes the serial terminal

setup using HyperTerminal on a Windows host:

1. Connect RSB-4210 (UART1, CN27 of RTX-CSB) to your Windows PC by using

a serial cable.

2. Open HyperTerminal on your Windows PC, and select the settings shown in Fig-

ure 3-6.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 103 104

Komentarze do niniejszej Instrukcji

Brak uwag

Advantech RSB-4210 Evaluation Kit Instrukcja Użytkownika Strona 54

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kluczowe komponenty serwerowe Advantech RSB-4210 Evaluation Kit