Advantech RS-485 Instrukcja Użytkownika Pobierz pdf (Strona 143)

ADAM-5000 6-21

Chapter 6

$aaSiArrff $aaSiArrff

Name RTD Configuration

Description Sets slot index, input range, data format and integration

time for a specified RTD input module in a specified

system.

Syntax $aaSiArrff(cr)

$ is a delimiter character.

aa (range 00-FF) represents the 2-character hexadecimal

address of the ADAM-5000 system you want to

configure.

Si identifies the desired slot i (i:0to3).

A represents the I/O module configuration command.

rr represents the 2-character hexadecimal code of the

input range. (See Appendix B)

ff is a hexadecimal number that equals the 8-bit parame-

ter representing data format. Bits 0 and 1 represent data

format. Bit 7 represents integration time. The layout for

the 8-bit parameter is shown in Figure 6-3 (See page 6-

38). The other bits are not used and are set to 0. (cr) is

the terminating character, carriage return (0Dh).

Response !aa(cr) if the command is valid.

?aa(cr) if an invalid operation was entered.

There is no response if the module detects a syntax error

or communication error or if the specified address does

not exist.

! delimiter character indicating a valid command was

received.

? delimiter character indicating the command was

invalid.

aa (range 00-FF) represents the 2-character hexadecimal

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 347 348

Brak uwag

Advantech RS-485 Instrukcja Użytkownika Strona 143