Advantech RS-100-RT Instrukcja Użytkownika Pobierz pdf (Strona 210)

100

101

4-126 ADAM 4000 Series User's Manual

Command Set

4016

$AAB

Name Span Calibration

Description Stores the voltage output value of the addressed strain gauge

input module as 10V reference.

Syntax $AAB(cr)

$ is a delimiter character.

AA(range 00-FF) represents the 2-character hexadecimal

address of the strain gauge input module who’s output channel

is to be calibrated.

B is the span calibration command.

(cr) is the terminating character, carriage return (0Dh)

Response !AA(cr) if the command is valid.

?AA(cr) if an invalid command was issued.

There is no response if the module detects a syntax error or

communication error or if the specified address does not exists.

! delimiter character indicating a valid command was received.

? delimiter character indicating the command was invalid.

AA (range 00-FF) represents the 2-character hexadecimal

address of the strain gauge input module.

(cr) is the terminating character, carriage return (0Dh)

Before issuing the Span Calibration command, the analog output should be

trimmed to the correct value with the Trim Calibration command. A

voltmeter should be connected to the module’s output channel.(See also

the strain gauge input module’s Trim Calibration command and Chapter 5,

Calibration, for a detailed description.)

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 397 398

Komentarze do niniejszej Instrukcji

Brak uwag

Advantech RS-100-RT Instrukcja Użytkownika Strona 210

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Serwery Advantech RS-100-RT